Tag Archives: bearing groove

China wholesaler Active-Power Industries Miniature Deep Groove Ball Bearing 608zz 608-2RS 6 6305-2RS 6407 Deep Groove Ball Bearing China Suppliers ball bearing

Product Description

ACTIVE-POWER INDUSTRIES Miniature Deep Groove Ball Bearing 608Zz 608-2Rs 6 6305-2RS 6407 Deep Groove Ball Bearing China Suppliers

Product Description

Deep groove ball bearings (GB/T 276-2003) The original list of radial ball bearings is the most widely used rolling bearing. It is characterized by small frictional resistance and high speed and can be used on parts that bear radial loads or joint loads that act simultaneously in radial and axial directions and can also be used on parts that bear axial loads, such as small-power motors, Automotive and tractor gearboxes, machine tool gearboxes, general machines, tools, etc.

Deep groove ball bearings are the most common type of rolling bearings:

The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls, and a set of cages. There are 2 types of deep groove ball bearings: single-row and double-row. The structure of deep groove balls is also divided into 2 types: sealed and open. The open type means that the bearing does not have a sealed structure. seal. The material of the dust-proof sealing cover is stamped steel plate, which simply prevents dust from entering the bearing raceway. The oil-proof type is a contact oil seal, which can effectively prevent the grease in the bearing from overflowing.

The type code of single row deep groove ball bearing is 6, and the code name of double row deep groove ball bearing is 4. Its structure is simple, and easy to use, and it is the most commonly produced and widely used type of bearing.

According to the size of deep groove ball bearings, they can be divided into:

(1) Miniature bearings – bearings with a nominal outer diameter of 26mm or less;
(2) Small bearings – bearings with a nominal outer diameter ranging from 28 to 55mm;
(3) Small and medium-sized bearings – bearings with a nominal outer diameter ranging from 60-115mm;
(4) Medium and large bearings – bearings with a nominal outer diameter ranging from 120-190mm
(5) Large bearings – bearings with a nominal outer diameter ranging from 200-430mm;
(6) Extra-large bearings – bearings with a nominal outer diameter of 440mm or more.

Product Parameters

Product Name	Deep Groove Ball Bearing
Material	Gcr15
Size	5mm-500mm
Precision Rating	P0 P6 P5 P4 P2
Clearance	C2 C0 C3 C4 C5
Seals Type	Z ZZ 2RS ZNR 2RS1 2RSH 2RSL 2RZ 2Z 2ZNR, Z ZZ 2RS ZNR 2RS1 2RSH 2RSL 2RZ 2Z 2ZNR

CHROME STEEL*				Dimensions in mm unless otherwise specified
Bore	O.D.	Width	Open Bearing	Shielded Bearing	Sealed Bearing	Basic Load Ratings
						KN
			HNS	HNS	HNS	dynamic	static
			Reference	Reference	Reference	C	Co
20	42	12	6004	6004ZZ	6004-2RS	7.22	4.46
	47	14	6204	6204ZZ	6204-2RS	12.7	6.5
	52	15	6304	6304ZZ	6304-2RS	15.9	7.8
25	47	12	6005	6005ZZ	6005-2RS	10.1	5.85
	52	15	6205	6205ZZ	6205-2RS	14	7.8
	62	17	6305	6305ZZ	6305-2RS	22.5	11.6
	80	21	6405	6405ZZ	6405-2RS	36.1	19.4
30	55	13	6006	6006ZZ	6006-2RS	10.2	6.91
	62	16	6206	6206ZZ	6206-2RS	19.5	11.2
	72	19	6306	6306ZZ	6306-2RS	28.1	16
	90	23	6406	6406ZZ	6406-2RS	43.4	23.9
35	62	14	6007	6007ZZ	6007-2RS	16	10.3
	72	17	6207	6207ZZ	6207-2RS	25.5	15.3
	80	21	6307	6307ZZ	6307-2RS	33.2	19
	100	25	6407	6407ZZ	6407-2RS	55	31
40	68	15	6008	6008ZZ	6008-2RS	13	11.5
	80	18	6208	6208ZZ	6208-2RS	29.8	18
	90	23	6308	6308ZZ	6308-2RS	39.8	23.3
	110	27	6408	6408ZZ	6408-2RS	65.5	37.5
45	75	16	6009	6009ZZ	6009-2RS	21	14.9
	85	19	6209	6209ZZ	6209-2RS	32.2	21
	100	25	6309	6309ZZ	6309-2RS	51.1	30.5
	120	29	6409	6409ZZ	6409-2RS	77.5	45.5
50	80	16	6571	6571ZZ	6571-2RS	22	16.2
	90	20	6210	6210ZZ	6210-2RS	34	22.5
	110	27	6310	6310ZZ	6310-2RS	59.9	36.9
	130	31	6410	6410ZZ	6410-2RS	92.2	55.2
55	90	18	6011	6011ZZ	6011-2RS	30.4	22
	100	21	6211	6211ZZ	6211-2RS	43.3	28.1
	120	29	6311	6311ZZ	6311-2RS	71.5	44.6
	140	33	6411	6411ZZ	6411-2RS	100	62.5
60	95	18	6012	6012ZZ	6012-2RS	30.7	22.7
	110	22	6212	6212ZZ	6212-2RS	46.1	31.5
	130	31	6312	6312ZZ	6312-2RS	79.4	50.4
	150	35	6412	6412ZZ	6412-2RS	109	70
65	100	18	6013	6013ZZ	6013-2RS	32.1	24.9
	120	23	6213	6213ZZ	6213-2RS	54.2	39.3
	140	33	6313	6313ZZ	6313-2RS	89.5	59.7
	160	37	6413	6413ZZ	6413-2RS	118	78.5
70	110	20	6014	6014ZZ	6014-2RS	38.6	30.6
	125	24	6214	6214ZZ	6214-2RS	58.9	43.6
	150	35	6314	6314ZZ	6314-2RS	101	66
	180	42	6414	6414ZZ	6414-2RS	140	99.5
75	115	20	6015	6015ZZ	6015-2RS	31	33.1
	130	25	6215	6215ZZ	6215-2RS	64.3	47.5
	160	37	6315	6315ZZ	6315-2RS	111	74.2
	190	45	6415	6415ZZ	6415-2RS	154	115
80	125	22	6016	6016ZZ	6016-2RS	47.5	39.8
	140	26	6216	6216ZZ	6216-2RS	68.1	53.3
	170	39	6316	6316ZZ	6316-2RS	120	83.9
	200	48	6416	6416ZZ	6416-2RS	163	125
85	130	22	6017	6017ZZ	6017-2RS	50.8	42.8
	150	28	6217	6217ZZ	6217-2RS	83.2	64
	180	41	6317	6317ZZ	6317-2RS	132	96.5
	210	52	6417	6417ZZ	6417-2RS	175	138
90	140	24	6018	6018ZZ	6018-2RS	58	49.8
	160	30	6218	6218ZZ	6218-2RS	92.7	71.3
	190	43	6318	6318ZZ	6318-2RS	145	108
	225	54	6418	6418ZZ	6418-2RS	192	158
95	145	24	6019	6019ZZ	6019-2RS	57.8	50
	170	32	6219	6219ZZ	6219-2RS	105	79.1
	200	45	6319	6319ZZ	6319-2RS	157	122
100	150	24	6571	6571ZZ	6571-2RS	64.5	56.2
	180	34	6220	6220ZZ	6220-2RS	118	88.4
	215	47	6320	6320ZZ	6320-2RS	173	140
105	160	26	6571	6571ZZ	6571-2RS	71.8	63.2
	190	36	6221	6221ZZ	6221-2RS	126	98.8
	225	49	6321	6321ZZ	6321-2RS	173	145
110	170	28	6571	6571ZZ	6571-2RS	81.9	72.9
	200	38	6222	6222ZZ	6222-2RS	136	112
	240	50	6322	6322ZZ	6322-2RS	193	171
120	180	28	6571	6571ZZ	6571-2RS	88.7	79.7
	215	40	6224	6224ZZ	6224-2RS	139	112
	260	55	6324	6324ZZ	6324-2RS	217	196
130	200	33	6026	6026ZZ	6026-2RS	105	96.8
	230	40	6226	6226ZZ	6226-2RS	148	125
	280	58	6326	6326ZZ	6326-2RS	218	205
140	210	33	6571	6571ZZ	6571-2RS	116	108
	250	42	6228	6228ZZ	6228-2RS	179	167
	300	62	6328	6328ZZ	6328-2RS	275	272
150	225	35	6030	6030ZZ	6030-2RS	132	125
150	270	45	6230	6230ZZ	6230-2RS	190	183
160	240	38	6032	6032ZZ	6032-2RS	145	138
160	290	48	6232	6232ZZ	6232-2RS	215	218

Company Profile

HangZhou Active-Power Industrial. is located in HangZhou, ZheJiang , China. The factory has been committed to the production research and development of bearings for more than 20 years. We support OEM and ODM bearing customization.

The main products are: Deep Groove Ball Bearing Taper Roller Bearing Tapered Roller Bearing Auto Wheel Hub Bearing Cylindrical Roller Bearing Spherical Roller Bearing Motor Bearing Needle Roller Bearing Angular Contact Ball Bearing.

FAQ

Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;

2>.Help customers with bearing choice, clearance configuration, product” life, and reliability analysis;

3>. Offer highly cost-effective and complete solution program according to site conditions;

4>. Offer localized program on introduced equipment to save running cost

Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;

2>.Help customers with trouble diagnosis and failure analysis;

3>. Visit customers regularly and feedback on their rational suggestions and requirements to the company.

Q3: How about your company’s strength?
1>.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request.

2>. World-Class Bearing:
We provide our customers with all types of indigenous roller bearings of world-class quality.

3>.OEM or Non-Stand Bearings:
Any requirement for Non-standard roller bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry.

4>.Genuine products With Excellent Quality:
The company has always proved the 100% quality products it provides with genuine intent.

5>. After-Sales Service and Technical Assistance:
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.

6>.Quick Delivery:
The company provides just-in-time delivery with its streamlined supply chain.

7>.Cost Saving:
We provide long-life, shock-resistant, and high-reliability roller bearings with excellent quality and better performance.
Resulting in increased cost savings.

Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, Please contact us at the first time, and we will immediately process

Q5: How long will you respond to our problems?
A: We will respond within 1 hour. 24 hours to solve your problem

Q6: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical
assistance with any special requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name:	Auto Bearing
Keywords:	Deep Groove Ball Bearing
Precision Rating:	P0 P6 P5 P4 P2
Width Size:	9mm-300mm
Diameter Size:	30mm-1600mm
Inner Diameter Size:	10mm-1320mm

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?

Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:

High-Carbon Chrome Steel (AISI 52100):

This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.

Stainless Steel (AISI 440C, AISI 304, AISI 316):

Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.

Ceramic:

Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.

Plastic (Polyamide, PEEK):

Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.

Bronze:

Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.

Hybrid Bearings:

Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.

Specialty Alloys:

For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.

Coated Bearings:

Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.

The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:

Lubrication:

Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.

Material Properties:

Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.

Clearance Changes:

Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.

Corrosion and Contamination:

Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.

Thermal Stress:

Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.

Noise and Vibration:

Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.

Lubricant Degradation:

Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.

Seal Effectiveness:

Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.

Choosing Appropriate Bearings:

When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.

Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

Deep Groove Ball Bearings:

Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.

Angular Contact Ball Bearings:

Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.

Self-Aligning Ball Bearings:

Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.

Thrust Ball Bearings:

Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.

Single-Row vs. Double-Row Bearings:

Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.

Miniature and Instrument Ball Bearings:

Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.

Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.

China wholesaler Active-Power Industries Miniature Deep Groove Ball Bearing 608zz 608-2RS 6 6305-2RS 6407 Deep Groove Ball Bearing China Suppliers ball bearing
editor by CX 2024-05-17

China factory High Quality China Brand CZPT High Speed Deep Groove Ball Bearing 61707 61708 61709 61710 Long-Lived connecting rod bearing

Product Description

High quality SKF brand CZPT High Speed Deep Groove Ball Bearing 61707 61708 61709 61710 Long-Lived

Bearing is an important part of contemporary machinery and equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during its movement, and ensure its rotation accuracy. According to the different friction properties of the moving elements, bearings can be divided into rolling bearings and sliding bearings.

We can provide deep groove ball bearing,taper roller bearing,spherical roller bearing,angular contact ball bearing,needle bearing,self-aligning ball bearing,linear bearing,pillow block bearing,wheel hub bearing,thin wall bearing,ceramic bearing,and many famous brand bearings.

A wide range of applications:
• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• 2 Wheeler.

Product Name	Deep Groove Ball Bearing
Brand Name	SKF/NTN/NSK/KOYO/NACHI/TIMKEN/IKO
Material	Chrome Steel ,Stainless steel,Ceramic,Nylon
Precision Grade	P0,P6,P5,P4,P2(ABEC1, ABEC3, ABEC5, ABEC7, ABEC9)
Greese	SRL ,PS2, Alvania R12 ,etc
Certifications	ISO 9001
Package	Box,Carton,Wooden Box,Plastic Tube or Per buyers requirement .
MOQ	2PCS
Serice	OEM
Sample	Available
Payment Term	TT or L/C or Western Union
Port	HangZhou/HangZhou/ZheJiang

Product Parameters

6000 series deep groove ball bearings
Bearing No.	Boundary Dimensions(mm)			Basic Load Rating(N)		Weight(KG)
Bearing No.	d	D	B	Cr	Cor	Weight(KG)
604	4	12	4	960	350	0.571
605	5	14	5	1070	420	0.0037
606	6	17	6	1960	730	0.0069
607	7	19	6	2800	1060	0.0082
608	8	22	7	3290	1360	0.0129
609	9	24	7	3330	1410	0.016
6000	10	26	8	4160	1780	0.019
6001	12	28	8	5110	2380	0.571
6002	15	32	9	5590	2840	0.03
6003	17	35	10	6000	3250	0.039
6004	20	42	12	9390	5571	0.069
6005	25	47	12	10060	5860	0.08
6006	30	55	13	11900	7460	0.12
6007	35	62	14	16210	10420	0.16
6008	40	68	15	17030	11700	0.19
6009	45	75	16	21080	14780	0.25
6571	50	80	16	22000	16260	0.26
6011	55	90	18	31500	18400	0.39
6012	60	95	18	30000	23000	0.42
6013	65	100	18	32000	25000	0.44
6014	70	110	20	38000	31000	0.6
6015	75	115	20	38000	31000	0.64
6016	80	125	22	47500	40000	0.85
6017	85	130	22	47500	40000	0.89
6018	90	140	24	63800	59000	1.15
6019	95	145	24	66700	62300	1.2
6571	100	150	24	72500	70000	1.25
6200 Series Miniature Deep Groove Ball Bearing
Bearing No.	Boundary Dimensions(mm)			Basic Load Rating(N)		Weight(KG)
Bearing No.	d	D	B	Cr	Cor	Weight(KG)
624	4	13	5	1150	400	0.0032
625	5	16	5	1880	680	0.0051
626	6	19	6	2800	1060	0.
627	7	22	7	3290	1360	0.0131
628	8	24	8	3330	1410	0.017
629	9	26	8	4160	1780	0.0191
6200	10	30	9	5110	2380	0.032
6201	12	32	10	6180	3060	0.037
6202	15	35	11	7450	3700	0.045
6203	17	40	12	9560	4780	0.065
6204	20	47	14	12840	6650	0.11
6205	25	52	15	14571	7930	0.13
6206	30	62	16	19460	11310	0.2
6207	35	72	17	25670	15300	0.29
6208	40	80	18	29520	181400	0.37
6209	45	85	19	32500	20400	0.41
6210	50	90	20	35000	32300	0.46
6211	55	100	21	43500	29200	0.61
6212	60	110	22	52500	36000	0.78
6213	65	120	23	57200	45710	0.99
6214	70	125	24	62000	44000	1.05
6215	75	130	25	66000	49500	1.2
6216	80	140	26	72500	53000	1.4
6217	85	150	28	83500	64000	1.8
6218	90	160	30	96000	71500	2.15
6219	95	170	32	109000	82000	2.6
6220	100	180	34	122000	93000	3.15

16000	16000-2Z	61700	61800	61900	62200	62200-2Z	62200-2RS1	62300	62300-2Z	62300-2RS1
16001	16001-2Z	61701	61801	61901	62201	62201-2Z	62201-2RS1	62301		62301-2RS1
16002	16002-2Z	61702	61802	61902	62202	62202-2Z	62202-2RS1	62302		62302-2RS1
16003	16003-2Z	61703	61803	61903	62203	62203-2Z	62203-2RS1	62303		62303-2RS1
16004	16004-2Z	61704	61804	61904	62204	62204-2Z	62204-2RS1	62304		62304-2RS1
16005	16005-2Z	61705	61805	61905	62205	62205-2Z	62205-2RS1	62305		62305-2RS1
16006	16006-2Z	61706	61806	61906	62206	62206-2Z	62206-2RS1	62306		62306-2RS1
16007	16007-2Z	61707	61807	61907	62207	62207-2Z	62207-2RS1	62307		62307-2RS1
16008	16008-2Z	61708	61808	61908	62208	62208-2Z	62208-2RS1	62308		62308-2RS1
16009	16009-2Z	61709	61809	61909	62209	62209-2Z	62209-2RS1	62309		62309-2RS1
16571	16571-2Z	61710	61810	61910	62210	62210-2Z	62210-2RS1	62310		62310-2RS1
16011	16011-2Z		61811	61911	62211	62211-2Z	62211-2RS1	62311		62311-2RS1
16012	16012-2Z		61812	61912	62212	62212-2Z	62212-2RS1	62312		62312-2RS1
16013	16013-2Z		61813	61913	62213	62213-2Z	62213-2RS1	62313		62313-2RS1
16014	16014-2Z		61814	61914	62214	62214-2Z	62214-2RS1	62314		62314-2RS1
16015	16015-2Z		61815	61915
16016	16016-2Z		61816	61916
16017	16017-2Z		61817	61917
16018	16018-2Z		61818	61918
16019	16019-2Z		61819	61919
16571	16571-2Z		61820	61920
16571	16571-2Z		61821	61921
16571	16571-2Z		61822	61922
16571			61824	61924
16026			61826	61926
16571			61828	61928
16030			61830	61930
16032			61832	61932
16034			61834	61934
16036			61836	61936
16038			61838	61938
16040			61840	61940
16044			61844	61944
16048			61848	61948
16052			61852	61952
16056			61856	61956
16060			61860	61960
16064			61864	61964
16068			61868	61968
16072			61872	61972

Packaging & Shipping

Company Profile

Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.

SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.

CUSTOMIZED
The customized LOGO or drawing is acceptable for us.

MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

FAQ

1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales,
most customers’orders are more than 1 ton.
2.What is your latest delivery time?
Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by
customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible and provide the detailed information you need.
Please feel free to contact us, if you have any other question

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning:	Non-Aligning Bearing
Separated:	Unseparated
Rows Number:	Single
Load Direction:	Radial Bearing
Material:	Bearing Steel
Contact Angle:	0

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

Can you Provide Examples of Industries where Ball Bearings are Crucial Components?

Ball bearings are essential components in a wide range of industries where smooth motion, load support, and precision are vital. Here are some examples of industries where ball bearings play a crucial role:

Automotive Industry:

Ball bearings are used in various automotive applications, including wheel hubs, transmissions, engines, steering systems, and suspension components. They provide reliable rotation and support in both passenger vehicles and commercial vehicles.

Aerospace Industry:

In the aerospace sector, ball bearings are found in aircraft engines, landing gear systems, control surfaces, and avionics equipment. Their ability to handle high speeds and precision is vital for aviation safety.

Industrial Machinery:

Ball bearings are integral to a wide range of industrial machinery, including pumps, compressors, conveyors, machine tools, printing presses, and textile machinery. They facilitate smooth operation and load distribution in these diverse applications.

Medical Equipment:

In medical devices and equipment, ball bearings are used in surgical instruments, imaging equipment, dental tools, and laboratory machinery. Their precision and smooth movement are crucial for accurate diagnostics and treatments.

Robotics and Automation:

Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.

Renewable Energy:

Wind turbines and solar tracking systems utilize ball bearings to enable efficient rotation and tracking of the wind blades and solar panels. Ball bearings withstand the dynamic loads and environmental conditions in renewable energy applications.

Marine and Shipbuilding:

Ball bearings are used in marine applications such as ship propulsion systems, steering mechanisms, and marine pumps. They withstand the corrosive environment and provide reliable performance in maritime operations.

Heavy Equipment and Construction:

In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.

Electronics and Consumer Appliances:

Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.

Oil and Gas Industry:

In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.

These examples demonstrate how ball bearings are indispensable components in various industries, contributing to the efficiency, reliability, and functionality of diverse mechanical systems and equipment.

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:

ISO Standards:

The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.

ABEC (Annular Bearing Engineering Committee) Ratings:

ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.

DIN Standards:

The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.

JIS (Japanese Industrial Standards):

JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.

ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

CE Marking:

CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.

Industry-Specific Standards:

Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.

Quality Management Systems:

Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.

When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Ball bearings offer several primary benefits when used in machinery and equipment. Their design and functionality provide advantages that contribute to the efficient and reliable operation of various applications. Here are the key benefits:

Reduced Friction:

One of the primary benefits of ball bearings is their ability to minimize friction between moving parts. The rolling motion of the balls reduces the contact area and sliding friction, leading to smoother operation and less energy loss due to frictional heating.

Efficient Load Support:

Ball bearings are engineered to support both radial and axial loads, making them versatile for applications with multidirectional forces. This load-bearing capability allows machinery to handle different types of loads while maintaining performance and stability.

Smooth Rotation:

Ball bearings enable smooth and precise rotational movement. The rolling motion of the balls provides consistent motion with minimal resistance, ensuring that machinery operates smoothly and without jerks.

High-Speed Capability:

Due to their low friction and efficient rolling action, ball bearings are suitable for high-speed applications. They allow machinery and equipment to achieve and maintain high rotational speeds without excessive wear or heat buildup.

Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

Energy Efficiency:

By minimizing friction and reducing energy losses, ball bearings contribute to the overall energy efficiency of machinery. This is particularly important in applications where energy consumption is a concern.

Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

In summary, the primary benefits of using ball bearings in machinery and equipment include reduced friction, efficient load support, smooth rotation, high-speed capability, reduced wear and maintenance, energy efficiency, versatility, reliability, and quiet operation. These benefits collectively enhance the performance and longevity of machinery across various industries.

editor by CX 2024-05-17

China Best Sales Good Price High Quality CZPT Deep Groove Ball Bearing with Good quality

Product Description

China manufacturer CZPT CZPT CZPT CZPT Deep Groove Ball Bearing 6204R Zz 2RS DDU good price

are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for
low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions,
are easy to mount, and require less maintenance than other bearing types.

Product name	Deep groove ball bearings
Material	Bearing Steel
Standard	DIN GB ISO JIS
Bearing Package	Barreled, bagged, boxed, palletized or as customers’ requirement.
Service	OEM service provided
Delivery time	3-10 days depends on quantity needed

Detailed Photos

Product Parameters

6000 series deep groove ball bearings
Bearing No.	Boundary Dimensions(mm)			Basic Load Rating(N)		Weight(KG)
Bearing No.	d	D	B	Cr	Cor	Weight(KG)
604	4	12	4	960	350	0.571
605	5	14	5	1070	420	0.0037
606	6	17	6	1960	730	0.0069
607	7	19	6	2800	1060	0.0082
608	8	22	7	3290	1360	0.0129
609	9	24	7	3330	1410	0.016
6000	10	26	8	4160	1780	0.019
6001	12	28	8	5110	2380	0.571
6002	15	32	9	5590	2840	0.03
6003	17	35	10	6000	3250	0.039
6004	20	42	12	9390	5571	0.069
6005	25	47	12	10060	5860	0.08
6006	30	55	13	11900	7460	0.12
6007	35	62	14	16210	10420	0.16
6008	40	68	15	17030	11700	0.19
6009	45	75	16	21080	14780	0.25
6571	50	80	16	22000	16260	0.26
6011	55	90	18	31500	18400	0.39
6012	60	95	18	30000	23000	0.42
6013	65	100	18	32000	25000	0.44
6014	70	110	20	38000	31000	0.6
6015	75	115	20	38000	31000	0.64
6016	80	125	22	47500	40000	0.85
6017	85	130	22	47500	40000	0.89
6018	90	140	24	63800	59000	1.15
6019	95	145	24	66700	62300	1.2
6571	100	150	24	72500	70000	1.25
6200 Series Miniature Deep Groove Ball Bearing
Bearing No.	Boundary Dimensions(mm)			Basic Load Rating(N)		Weight(KG)
Bearing No.	d	D	B	Cr	Cor	Weight(KG)
624	4	13	5	1150	400	0.0032
625	5	16	5	1880	680	0.0051
626	6	19	6	2800	1060	0.
627	7	22	7	3290	1360	0.0131
628	8	24	8	3330	1410	0.017
629	9	26	8	4160	1780	0.0191
6200	10	30	9	5110	2380	0.032
6201	12	32	10	6180	3060	0.037
6202	15	35	11	7450	3700	0.045
6203	17	40	12	9560	4780	0.065
6204	20	47	14	12840	6650	0.11
6205	25	52	15	14571	7930	0.13
6206	30	62	16	19460	11310	0.2
6207	35	72	17	25670	15300	0.29
6208	40	80	18	29520	181400	0.37
6209	45	85	19	32500	20400	0.41
6210	50	90	20	35000	32300	0.46
6211	55	100	21	43500	29200	0.61
6212	60	110	22	52500	36000	0.78
6213	65	120	23	57200	45710	0.99
6214	70	125	24	62000	44000	1.05
6215	75	130	25	66000	49500	1.2
6216	80	140	26	72500	53000	1.4
6217	85	150	28	83500	64000	1.8
6218	90	160	30	96000	71500	2.15
6219	95	170	32	109000	82000	2.6
6220	100	180	34	122000	93000	3.15

Packaging & Shipping

Company Profile

Our Advantages

CUSTOMIZED
The customized LOGO or drawing is acceptable for us.

MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.

FAQ

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name:	Deep Groove Ball Bearing
Bore Size:	1-160 mm
Seals Type:	Zz 2RS Open

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:

Vibration:

Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.

Bearing Type and Design:

The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.

Lubrication:

Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.

Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

Material and Manufacturing Quality:

The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.

Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:

Material Composition:

Ceramic Ball Bearings:

Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.

Traditional Steel Ball Bearings:

Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.

Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

Speed and Precision:

Ceramic Ball Bearings:

Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.

Traditional Steel Ball Bearings:

Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.

Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.

ball bearing

What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?

Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:

Load Type and Magnitude:

Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.

Speed and Operating Conditions:

Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.

Accuracy and Precision:

For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.

Space Limitations:

If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.

Thrust and Radial Loads:

Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.

Alignment and Misalignment:

If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.

Mounting and Installation:

Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.

Lubrication and Maintenance:

Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.

Environmental Conditions:

Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.

Bearing Material:

Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.

Bearing Arrangement:

Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.

By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.

China Best Sales Good Price High Quality CZPT Deep Groove Ball Bearing with Good quality
editor by CX 2024-05-15

China Good quality Pillow Block Linear Ball Bearing SC , CZPT Series SC16UU, SCS16UU deep groove ball bearing

Product Description

A linear guideway allows a type of linear motion that utilizes rolling elements such as balls or rollers. By using recirculating rolling elements between the rail and the block, a linear guideway can achieve high precision linear motion.

Application:
CNC Machining Centre
CNC Lathe
Industrial robots
Semiconductor machines
Measuring machine
Transporting machine
Welding machine etc.

Product Parameters

Packaging & Shipping

Our Advantages

1. We have over 10 years’ experience.
2. OEM or Non-Standard Bearings: Any requirement for Non-standard bearings is easily fulfilled by us due to our vast knowledge and links in the industry.
3. After Sales Service and Technical Assistance: Our company provides after-sales service and technical assistance as per the customer’s requirements and needs.
4. Quick Delivery: Our company provides just-in-time delivery with our streamlined supply chain.
5.We attend promptly to any customer questions. We believe that if our customers are satisfied then it proves our worth. Our customers are always given quick support.

Please contact us immediately if you have any questions.

Application:	Workshop Crane
Material:	Bearing Steel
Driven Type:	AC

What are the Common Signs of Wear or Damage in Ball Bearings that Indicate the Need for Replacement?

Ball bearings are subjected to wear and stress during operation, and over time, they may exhibit signs of damage or deterioration that warrant replacement. Recognizing these signs is crucial to prevent catastrophic failure and ensure safe and reliable operation. Here are the common signs of wear or damage in ball bearings:

Unusual Noise:

If you hear unusual grinding, clicking, or rumbling noises coming from the bearing during operation, it may indicate worn-out or damaged components. Unusual noise suggests that the bearing is no longer operating smoothly.

Vibration:

Excessive vibration in the machinery can be a sign of bearing wear. Vibrations can result from uneven wear, misalignment, or damaged components within the bearing.

Increased Temperature:

Higher operating temperatures than usual may indicate increased friction due to inadequate lubrication, wear, or other issues. Monitoring the bearing’s temperature can help identify potential problems.

Irregular Movement:

If you notice irregular movement, jerking, or sticking during rotation, it could be a sign that the bearing is no longer operating smoothly. This may be due to damaged rolling elements or raceways.

Reduced Performance:

If the machinery’s performance has decreased, it may be due to a compromised bearing. Reduced efficiency, increased energy consumption, or a decline in overall performance could be indicators of bearing wear.

Visible Wear or Damage:

Inspect the bearing for visible signs of wear, such as pitting, scoring, or discoloration on the rolling elements or raceways. Severe wear or damage is a clear indication that the bearing needs replacement.

Leakage or Contamination:

If there is evidence of lubricant leakage, contamination, or the presence of foreign particles around the bearing, it suggests that the seal or shield may be compromised, leading to potential damage.

Looseness or Excessive Play:

If you can feel excessive play or looseness when manually moving the bearing, it could indicate worn-out components or misalignment.

Reduced Lifespan:

If the bearing’s expected lifespan is significantly shorter than usual, it may be due to inadequate lubrication, excessive loads, or improper installation, leading to accelerated wear.

Frequent Failures:

If the bearing is consistently failing despite regular maintenance and proper use, it could indicate a chronic issue that requires addressing, such as inadequate lubrication or misalignment.

It’s important to conduct regular inspections, monitor performance, and address any signs of wear or damage promptly. Replacing worn or damaged ball bearings in a timely manner can prevent further damage to machinery, reduce downtime, and ensure safe and efficient operation.

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Miniature ball bearings, as the name suggests, are smaller in size compared to standard-sized ball bearings. They have distinct characteristics and are designed to meet the unique requirements of applications that demand compactness, precision, and efficient rotation in confined spaces. Here’s how miniature ball bearings differ from standard-sized ones and where they are commonly used:

Size:

The most noticeable difference is their size. Miniature ball bearings typically have outer diameters ranging from a few millimeters to around 30 millimeters, while standard-sized ball bearings have larger dimensions suitable for heavier loads and higher speeds.

Load Capacity:

Due to their smaller size, miniature ball bearings have lower load-carrying capacities compared to standard-sized bearings. They are designed for light to moderate loads and are often used in applications where precision and compactness are prioritized over heavy load support.

Precision:

Miniature ball bearings are known for their high precision and accuracy. They are manufactured to tighter tolerances, making them suitable for applications requiring precise motion control and low levels of vibration.

Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

Friction and Efficiency:

Miniature ball bearings generally have lower friction due to their smaller contact area. This contributes to higher efficiency and reduced heat generation in applications that require smooth and efficient motion.

Applications:

Miniature ball bearings find applications in various industries and sectors:

Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

Overall, miniature ball bearings are specialized components designed for applications where space, precision, and efficient rotation are paramount. Their compactness and high precision make them crucial in various industries requiring reliable motion control in limited spaces.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:

Friction Reduction:

Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.

Wear Prevention:

Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.

Heat Dissipation:

Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.

Corrosion Resistance:

Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.

Noise Reduction:

Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.

Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

Selection of Lubricant:

Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.

Regular Maintenance:

Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.

In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.

China Good quality Pillow Block Linear Ball Bearing SC , CZPT Series SC16UU, SCS16UU deep groove ball bearing
editor by CX 2024-05-15

China high quality Manufacturer Direct Supply Deep Groove Ball Bearing 64 Serises 6411 6412 Zz 2RS for Machinery Industries with Hot selling

Product Description

PRODUCT PICTURES

OUR SERVICES

We can provide manufacturing capabilities and services of regular bearings for you, or customized non-standard bearings as you required.

BEARING:
— Dimensions
— Material
— Tolerance standard

APPEARANCE:
— Logo (Laser Marking)
— Package Design

40+ YEARS EXPERIENCE
CONTINUOUS AND STABLE DELIVERY OF PRODUCTS.
With over 40 years experience of the bearing manufacturing, we know how to make good bearings with less cost consistently and efficiently.

We use advanced CNC turning, grinding, and superfinishing machines to ensure high, stable, and accurate machining. All of your goods, from the most economical category, to the highest rated category, will always be manufactured precisely to the standards you require.

OWN HEAT TREATMENT
CONTROALLABLE COST AND QUALITY.

Heat treatment is 1 of the crucial processes to ensure high performance of bearing materials. Compared with other manufacturers, we can produce higher quality bearings at smaller cost, with a more flexible and controllable production schedule, and in a shorter time.

We have 6 heat treatment production lines.

Bearings are heated uniformly, with small deformation and little/no oxidized decarburization, which can make them have high hardness, high fatigue resistance, good wear resistance, dimensional stability, and excellent mechanical strength.

OUTSTXIHU (WEST LAKE) DIS. QUALITY
LOW NOISE, LOW FRICTION AND LONG LIFE.

All our products are characterized by low noise, low friction and long life. This is due to our attention to the roundness, waviness and surface roughness of bearing raceway.

Our products fully meets the requirements of national and international standards accorind to the testing result of
roughness, roundness, hardness, vibration noise, vibration velocity.

PACKING
PACKAGING THAT HELPS SELL.

1, Inner package
Corrosion and Dust Proof PE plastic film / bag packing + Tube packing, or Wrapping tape for larger bearings.

2, Corrugated Individual Box
Our attractive sales-helpful “3-JOYS” package, or as the design of your package.
3, Outer package
Corrugated carton + Wooden pallet

MODERN WELL-ORGANIZED WAREHOUSE

· Constant temperature (20°C) and humidity (RH 52%) warehouse
· Hundreds of models on hand, short delivery time.

HONOR & SYSTEM CERTIFICATES

EXHIBITION

SAMPLES POLICY

FREE SAMPLES AND SHIPPING

We are happy to send you free samples of our bearings for field testing. All transportation costs will be paid by us.

Please note: Depending on the model and value of samples, this policy may not apply!

Please contact our sales staff for details.

TRANSPORTATION
FASTEST DELIVERY TO CUSTOMERS
CUSTOMERS FEEDBACK

PAYMENT TERMS
To facilitate your payment, we offer a variety of options!

FAQ

1, About the lead time.

This depends on several factors, like Is the production schedule tight? Is there a corresponding model in stock, and is there enough of this model in stock? How many pcs of that model would be ordered?
Simply speaking, based on a 20′ GP container load:

If the model your Preferred is	Sufficient stock	Lead Time
Regular models	YES	Within 7 days
Regular models	NO	Within 30 days
Non-regular model	NO	About 50 days

For accurate estimate, please contact with our sale stuff. Thanks.

2, Minimum order quantity.

Even just ONE piece of bearing is ok for us.

3, If you don’t know which model is the right choice…

We would like to give you some advise if you like, according to the real situation and demand of your local market. Our purpose is to help you to get proper and right models for your customers, so that you would make a better sales and income finally.

4, Factory Inspection

We surely would welcome you or your representatives to come to our plants or working offices to take a good look and chat with our hardworking CZPT employees. Ask our sales stuff and she/he will arrange that for you.

OPTIONS OF SPECIFICATION AND STHangZhouRD

Subject	Symbol	Description
Sealing & Sealing type	Z	Metal shield on 1 side.
	ZZ	Metal shields on both sides.
	RS	Rubber seal on 1 side.
	2RS	Rubber seals on both sides.
	ZNR	Shield on 1 side, snap ring groove in the outer ring, with snap ring on the opposite side of the shield
	2ZNR	Shield on both sides, snap ring groove in the outer ring, with snap ring
	ZNBR	Shield on 1 side, snap ring groove in the outer ring, with snap ring on the same side as the shield
Vibration Velocity	V	Normal vibration level. Is not indicated as a standard.
	V1	Lower vibration level than normal.
	V2	Lower vibration level than V1.
	V3	Lower vibration level than V2.
	V4	Lower vibration level than V3.
Tolerances	P0(ABEC1)	Bearings in standard tolerance
	P6(ABEC3)	Tighter tolerance than standard bearings
	P5(ABEC5)	Tolerance tighter than P6
	P4(ABEC7)	Tolerance tighter than P5
	P2(ABEC9)	Tolerance tighter than P4
Radial internal clearance	C1	Smaller clearance than C2
	C2	Smaller clearance than CN
	CN(C0)	Clearance than normal
	C3	Clearance larger than CN
	C4	Clearance larger than C3
	C5	Clearance larger than C4
Snap Ring Groove	N	Snap ring groove in the outer ring
	NR	Snap ring groove in the outer ring, with snap ring
	N1	One locating slot in 1 outer ring side face
	R	Flanged outer ring
Other technical modifications	NR	Groove with inserted snap ring in outer ring.
	N	Snap ring groove in the outer ring.
	SS	Stainless steel.

Cage Materials	J	Pressed steel cages
	M	Solid brass cage
	F	Solid cage made from steel or iron
	Y	Pressed brass cages.
	T	Laminated phenolic cages.
	TN	Polyamide cages
	TH	Glass-fiber reinforced phenolic resin cages.
	TV	Polyamide cage
Cage Designs	P	Window-type cage
	H	Claw-type cage
	A	Cage guided on the bearing outer ring
	B	Cage-guided on the bearing inner ring
	S	Cage with lubricating slots in the guiding surfaces
	D	Carbonitriding cage
	W	Welded cage
	R	Riveted Cage
Cage Types	N/A	Claw-type cage
		Ribbon cage
		Crown cage
		Sunflower cage
		Tapered cage

PRODUCT PARAMETERS

This tech sheet may not contain all or every piece of information you want to know. Please contact our sales staff to obtain or compare the information.

Designation	Boundary Dimension (mm)			Limiting Speed (rpm)		Load Rating (Kn)		Weight
Designation	Inner Diameter (d)	Outside Diameter (D)	Width (B)	Grease Lubrication	Oil Lubrication	Dynamic Load (cr)	Static Load (cor)	Weight (kg)
6403	17	62	17	11000	15000	22.7	10.8	0.27
6404	20	72	19	9500	13000	31	15.2	0.4
6405	25	80	21	9100	11000	36.1	19.4	0.53
6406	30	90	23	8100	9700	43.4	23.9	0.735
6407	35	100	25	7200	8600	55.0	31.0	0.952
6408	40	110	27	6300	8000	65.5	37.5	1.221
6409	45	120	29	5600	7000	77.5	45.5	1.52
6410	50	130	31	5300	6300	922	55.2	1.855
6411	55	140	33	4800	6000	100	62.5	2.316
6412	60	150	35	4500	5600	109	70	2.811
6413	65	160	37	4300	5300	118	78.5	3.342
6414	70	180	42	3800	4500	140	99.5	4.896
6415	75	190	45	3600	4300	154	115	5.739
6416	80	200	48	3400	4000	163	125	6.752
6417	85	210	52	3200	3800	175	138	7.933
6418	90	225	54	2800	3600	192	158	9.56
6420	100	250	58	2400	3200	223	195	12.9
6422	110	280	65	2000	2800	225	238	18.3

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material Option 2:	Stainless Steel
MOQ:	One Pallet
Seals Options:	Z / 2z, Rz / 2rz, RS / 2RS, Rsz / Rzz, Zn / Znr
Lubrication:	Grease or Oil
Tolerance:	P0 (ABEC1)/ P6 (ABEC3) / P5 (ABEC5)
Clearance:	C1/C2/C0/C3/C4/C5

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

How does Preload Affect the Performance and Efficiency of Ball Bearings?

Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:

Reduction of Internal Clearance:

Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.

Increased Stiffness:

Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.

Minimized Axial Play:

Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.

Enhanced Rigidity:

The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.

Reduction in Ball Slippage:

Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.

Improved Running Accuracy:

Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.

Optimized Performance at High Speeds:

Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.

Impact on Friction and Heat Generation:

While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.

Application-Specific Considerations:

The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.

Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.

ball bearing

What are the Differences between Deep Groove Ball Bearings and Angular Contact Ball Bearings?

Deep groove ball bearings and angular contact ball bearings are two common types of ball bearings, each designed for specific applications and load conditions. Here are the key differences between these two types of bearings:

Design and Geometry:

Deep Groove Ball Bearings:

Deep groove ball bearings have a simple design with a single row of balls that run along deep raceways in both the inner and outer rings. The rings are usually symmetrical and non-separable, resulting in a balanced load distribution.

Angular Contact Ball Bearings:

Angular contact ball bearings have a more complex design with two rows of balls, oriented at an angle to the bearing’s axis. This arrangement allows for the transmission of both radial and axial loads, making them suitable for combined loads and applications requiring high precision.

Load Carrying Capacity:

Deep Groove Ball Bearings:

Deep groove ball bearings are primarily designed to carry radial loads. They can handle axial loads in both directions, but their axial load-carrying capacity is generally lower compared to angular contact ball bearings.

Angular Contact Ball Bearings:

Angular contact ball bearings are specifically designed to handle both radial and axial loads. The contact angle between the rows of balls determines the bearings’ axial load-carrying capacity. They can handle higher axial loads and are commonly used in applications with thrust loads.

Contact Angle:

Deep Groove Ball Bearings:

Deep groove ball bearings have no defined contact angle, as the balls move in a deep groove along the raceways. They are primarily designed for radial loads.

Angular Contact Ball Bearings:

Angular contact ball bearings have a specified contact angle between the rows of balls. This contact angle allows them to carry both radial and axial loads and is crucial for their ability to handle combined loads.

Applications:

Deep Groove Ball Bearings:

Deep groove ball bearings are commonly used in applications that primarily require radial loads, such as electric motors, pumps, and conveyor systems. They are also suitable for high-speed operation.

Angular Contact Ball Bearings:

Angular contact ball bearings are used in applications where both radial and axial loads are present, such as in machine tools, automotive wheel hubs, and aerospace components. They are especially useful for applications that require precise axial positioning and handling of thrust loads.

Limitations:

Deep Groove Ball Bearings:

Deep groove ball bearings are not as suitable for handling significant axial loads and may experience skidding under certain conditions due to their deep raceways.

Angular Contact Ball Bearings:

Angular contact ball bearings can experience increased heat generation and wear at higher speeds due to the contact angle of the balls.

In summary, the design, load-carrying capacity, contact angle, and applications differ between deep groove ball bearings and angular contact ball bearings. Choosing the appropriate type depends on the specific load conditions and requirements of the application.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

Seals and Shields:

Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.

Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.

China high quality Manufacturer Direct Supply Deep Groove Ball Bearing 64 Serises 6411 6412 Zz 2RS for Machinery Industries with Hot selling
editor by CX 2024-05-15

China Good quality OEM Unstandard Deep Groove Ball Bearing ball bearing

Product Description

Product Parameters

MODEL NAME	DN D1 mm	TOLERANCE D1 mm	D D2 mm	TOLERANCE D2 mm	HEIGHT H mm	TOLERANCE H mm
BR-30001	30	-0.012	55	-0.013	13	-0.12
BR-30002	30	-0.012	55	-0.013	19	-0.12
BR-30003	30	-0.012	62	-0.013	16	-0.12
BR-35001	35	-0.012	62	-0.013	14	-0.12
BR-35002	35	-0.012	62	-0.013	20	-0.12
BR-35003	35	-0.012	72	-0.013	25	-0.12
BR-35004	35	-0.012	62	-0.013	16	-0.12

Company Profile

ZHangZhoug Shengya Bearing Technology Co. , Ltd. was foun
ded in 1996, covers an area of more than
10,000 square meters, has assets of more than 50 million yuan,
more than 80 employees, including more
than 10 professional and technical personnel with middle and se
nior professional titles, specializing in the
production of automotive bearings, motorcycle bearings, general
bearings, precision machine tool bear

ings and home appliances bearings, with an annual output of 10
million sets of small and medium-sized
bearings production capacity. The company to undertake various
types of non-standard special-shaped
bearings, a wide variety of fifine workmanship. Located in HangZhou
, an important industrial, commercial
and tourist city in ZHangZhoug Province, it is well-located with
our customers to provide quality service. We wish to cooperate convenient transportation. Scorpion sincere for
sincerely with you. For a better tomorrow.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body:	Ball Bearings
The Number of Rows:	Single
Outer Dimension:	Small and Medium-Sized (60-115mm)
Material:	Bearing Steel
Spherical:	Non-Aligning Bearings
Load Direction:	Axial Bearing

Samples:	US$ 0.1/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Size:

Load Capacity:

Precision:

Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

Friction and Efficiency:

Applications:

Miniature ball bearings find applications in various industries and sectors:

Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Friction Reduction:

Wear Prevention:

Heat Dissipation:

Corrosion Resistance:

Noise Reduction:

Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

Selection of Lubricant:

Regular Maintenance:

China Good quality OEM Unstandard Deep Groove Ball Bearing ball bearing
editor by CX 2024-05-14

China manufacturer Active-Power Industries 60TM04u40al Deep Groove Ball Bearing 6314-2RS 607 Zz Miniature Bearing Deep Groove Ball Bearings China Manufacturers wheel bearing

Product Description

ACTIVE-POWER INDUSTRIES 60Tm04U40Al Deep Groove Ball Bearing 6314-2RS 607 Zz Miniature Bearing Deep Groove Ball Bearings China Manufacturers

Product Description

Deep groove ball bearings are the most common type of rolling bearings:

According to the size of deep groove ball bearings, they can be divided into:

Product Parameters

Product Name	Deep Groove Ball Bearing
Material	Gcr15
Size	5mm-500mm
Precision Rating	P0 P6 P5 P4 P2
Clearance	C2 C0 C3 C4 C5
Seals Type	Z ZZ 2RS ZNR 2RS1 2RSH 2RSL 2RZ 2Z 2ZNR, Z ZZ 2RS ZNR 2RS1 2RSH 2RSL 2RZ 2Z 2ZNR

CHROME STEEL*				Dimensions in mm unless otherwise specified
Bore	O.D.	Width	Open Bearing	Shielded Bearing	Sealed Bearing	Basic Load Ratings
						KN
			HNS	HNS	HNS	dynamic	static
			Reference	Reference	Reference	C	Co
20	42	12	6004	6004ZZ	6004-2RS	7.22	4.46
	47	14	6204	6204ZZ	6204-2RS	12.7	6.5
	52	15	6304	6304ZZ	6304-2RS	15.9	7.8
25	47	12	6005	6005ZZ	6005-2RS	10.1	5.85
	52	15	6205	6205ZZ	6205-2RS	14	7.8
	62	17	6305	6305ZZ	6305-2RS	22.5	11.6
	80	21	6405	6405ZZ	6405-2RS	36.1	19.4
30	55	13	6006	6006ZZ	6006-2RS	10.2	6.91
	62	16	6206	6206ZZ	6206-2RS	19.5	11.2
	72	19	6306	6306ZZ	6306-2RS	28.1	16
	90	23	6406	6406ZZ	6406-2RS	43.4	23.9
35	62	14	6007	6007ZZ	6007-2RS	16	10.3
	72	17	6207	6207ZZ	6207-2RS	25.5	15.3
	80	21	6307	6307ZZ	6307-2RS	33.2	19
	100	25	6407	6407ZZ	6407-2RS	55	31
40	68	15	6008	6008ZZ	6008-2RS	13	11.5
	80	18	6208	6208ZZ	6208-2RS	29.8	18
	90	23	6308	6308ZZ	6308-2RS	39.8	23.3
	110	27	6408	6408ZZ	6408-2RS	65.5	37.5
45	75	16	6009	6009ZZ	6009-2RS	21	14.9
	85	19	6209	6209ZZ	6209-2RS	32.2	21
	100	25	6309	6309ZZ	6309-2RS	51.1	30.5
	120	29	6409	6409ZZ	6409-2RS	77.5	45.5
50	80	16	6571	6571ZZ	6571-2RS	22	16.2
	90	20	6210	6210ZZ	6210-2RS	34	22.5
	110	27	6310	6310ZZ	6310-2RS	59.9	36.9
	130	31	6410	6410ZZ	6410-2RS	92.2	55.2
55	90	18	6011	6011ZZ	6011-2RS	30.4	22
	100	21	6211	6211ZZ	6211-2RS	43.3	28.1
	120	29	6311	6311ZZ	6311-2RS	71.5	44.6
	140	33	6411	6411ZZ	6411-2RS	100	62.5
60	95	18	6012	6012ZZ	6012-2RS	30.7	22.7
	110	22	6212	6212ZZ	6212-2RS	46.1	31.5
	130	31	6312	6312ZZ	6312-2RS	79.4	50.4
	150	35	6412	6412ZZ	6412-2RS	109	70
65	100	18	6013	6013ZZ	6013-2RS	32.1	24.9
	120	23	6213	6213ZZ	6213-2RS	54.2	39.3
	140	33	6313	6313ZZ	6313-2RS	89.5	59.7
	160	37	6413	6413ZZ	6413-2RS	118	78.5
70	110	20	6014	6014ZZ	6014-2RS	38.6	30.6
	125	24	6214	6214ZZ	6214-2RS	58.9	43.6
	150	35	6314	6314ZZ	6314-2RS	101	66
	180	42	6414	6414ZZ	6414-2RS	140	99.5
75	115	20	6015	6015ZZ	6015-2RS	31	33.1
	130	25	6215	6215ZZ	6215-2RS	64.3	47.5
	160	37	6315	6315ZZ	6315-2RS	111	74.2
	190	45	6415	6415ZZ	6415-2RS	154	115
80	125	22	6016	6016ZZ	6016-2RS	47.5	39.8
	140	26	6216	6216ZZ	6216-2RS	68.1	53.3
	170	39	6316	6316ZZ	6316-2RS	120	83.9
	200	48	6416	6416ZZ	6416-2RS	163	125
85	130	22	6017	6017ZZ	6017-2RS	50.8	42.8
	150	28	6217	6217ZZ	6217-2RS	83.2	64
	180	41	6317	6317ZZ	6317-2RS	132	96.5
	210	52	6417	6417ZZ	6417-2RS	175	138
90	140	24	6018	6018ZZ	6018-2RS	58	49.8
	160	30	6218	6218ZZ	6218-2RS	92.7	71.3
	190	43	6318	6318ZZ	6318-2RS	145	108
	225	54	6418	6418ZZ	6418-2RS	192	158
95	145	24	6019	6019ZZ	6019-2RS	57.8	50
	170	32	6219	6219ZZ	6219-2RS	105	79.1
	200	45	6319	6319ZZ	6319-2RS	157	122
100	150	24	6571	6571ZZ	6571-2RS	64.5	56.2
	180	34	6220	6220ZZ	6220-2RS	118	88.4
	215	47	6320	6320ZZ	6320-2RS	173	140
105	160	26	6571	6571ZZ	6571-2RS	71.8	63.2
	190	36	6221	6221ZZ	6221-2RS	126	98.8
	225	49	6321	6321ZZ	6321-2RS	173	145
110	170	28	6571	6571ZZ	6571-2RS	81.9	72.9
	200	38	6222	6222ZZ	6222-2RS	136	112
	240	50	6322	6322ZZ	6322-2RS	193	171
120	180	28	6571	6571ZZ	6571-2RS	88.7	79.7
	215	40	6224	6224ZZ	6224-2RS	139	112
	260	55	6324	6324ZZ	6324-2RS	217	196
130	200	33	6026	6026ZZ	6026-2RS	105	96.8
	230	40	6226	6226ZZ	6226-2RS	148	125
	280	58	6326	6326ZZ	6326-2RS	218	205
140	210	33	6571	6571ZZ	6571-2RS	116	108
	250	42	6228	6228ZZ	6228-2RS	179	167
	300	62	6328	6328ZZ	6328-2RS	275	272
150	225	35	6030	6030ZZ	6030-2RS	132	125
150	270	45	6230	6230ZZ	6230-2RS	190	183
160	240	38	6032	6032ZZ	6032-2RS	145	138
160	290	48	6232	6232ZZ	6232-2RS	215	218