Merchandise Description
Solution Description
Model | Deep Groove Ball Bearing |
Dimension | All types |
Substance | Chrome Metal (Gcr15) + G16 |
Noise Level | Z1, Z2, Z3, Z4 |
Clearance | C0,CM,C3,C4,C2 |
Product Parameters
No. | Size | Rated load | Weight | ||||||||||
Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
d | D | Open Type | Shielded Variety | rsmin (r) | Cr | Cr | Shut | ||||||
mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
683 | three | .1181 | seven | .2756 | two | .0787 | 3 | .1181 | .one | .004 | 420 | one hundred thirty five | .571 |
684 | 4 | .1575 | nine | .3543 | 2.5 | .0984 | four | .1575 | .1 | .004 | 480 | a hundred and seventy | .571 |
685 | five | .1969 | 11 | .4331 | 3 | .1181 | 5 | .1969 | .fifteen | .006 | 770 | 320 | .0019 |
686 | six | .2362 | 13 | .5118 | 3.five | .1378 | 5 | .1969 | .15 | .006 | 1080 | 440 | .0571 |
687 | 7 | .2756 | 14 | .5512 | 3.5 | .1378 | five | .1969 | .fifteen | .006 | 1170 | 510 | .0030 |
688 | eight | .3150 | 16 | .6299 | four | .1575 | 5 | .1969 | .two | .008 | 1250 | 590 | .0038 |
689 | nine | .3543 | seventeen | .6693 | 4 | .1575 | five | .1969 | .two | .008 | 1330 | 660 | .0440 |
6800 | 10 | .3937 | 19 | .7480 | 5 | .1969 | 5 | .1969 | .three | .012 | 1590 | 750 | .0050 |
6801 | twelve | .4724 | 21 | .8268 | five | .1969 | 5 | .1969 | .three | .012 | 1910 | 1040 | .0060 |
6802 | 15 | .5906 | 24 | .9449 | 5 | .1969 | five | .1969 | .three | .012 | 2070 | 1250 | .0070 |
6803 | 17 | .6693 | 26 | 1.5716 | five | .1969 | 5 | .1969 | .3 | .012 | 2130 | 1360 | .0080 |
6804 | twenty | .7874 | 32 | 1.2598 | seven | .2756 | 7 | .2756 | .3 | .012 | 3480 | 2230 | .0190 |
6805 | 25 | .9843 | 37 | 1.4567 | 7 | .2756 | seven | .2756 | .3 | .012 | 3680 | 2630 | .5710 |
6806 | 30 | 1.1811 | forty two | 1.6535 | seven | .2756 | 7 | .2756 | .three | .012 | 4000 | 3150 | .0260 |
6807 | 35 | 1.3780 | forty seven | 1.8504 | seven | .2756 | 7 | .2756 | .3 | .012 | 4270 | 3600 | .5710 |
6808 | 40 | one.5748 | fifty two | 2.571 | 7 | .2756 | 7 | .2756 | .three | .012 | 4410 | 3890 | .0330 |
6809 | 45 | 1.7717 | 58 | two.2835 | seven | .2756 | seven | .2756 | .3 | .012 | 4590 | 4330 | .0400 |
6810 | 50 | 1.9685 | 65 | two.5591 | seven | .2756 | seven | .2756 | .three | .012 | 6610 | 6080 | .0520 |
6811 | 55 | 2.1654 | seventy two | 2.3846 | 9 | .3543 | nine | .3543 | .3 | .012 | 8530 | 8080 | . 0571 |
6812 | sixty | two.3622 | 78 | three.0709 | ten | .3937 | 10 | .3937 | .3 | .012 | 9200 | 8760 | .1060 |
6813 | 65 | 2.5591 | eighty five | three.3465 | ten | .3937 | 10 | .3937 | .six | .571 | 1571 | 9420 | .1250 |
6814 | 70 | 2.7559 | 90 | three.5433 | ten | .3937 | ten | .3937 | .six | .571 | 1571 | 10090 | .1350 |
6815 | 75 | two.9528 | 95 | 3.7402 | 10 | .3937 | ten | .3937 | .six | .571 | 11230 | 1571 | .1450 |
6816 | eighty | three.1496 | a hundred | 3.9370 | 10 | .3937 | ten | .3937 | .six | .571 | 11320 | 11080 | .1550 |
6817 | eighty five | 3.3465 | 110 | four.3307 | thirteen | .5118 | 13 | .5118 | one | .039 | 17599 | 18300 | .2650 |
6818 | 90 | three.5433 | one hundred fifteen | 4.5276 | 13 | .5118 | thirteen | .5118 | one | .039 | 17853 | 18961 | .2800 |
No. | Size | Rated load | Weight | ||||||||||
Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
d | D | Open Kind | Shielded Variety | rsmin (r) | Cr | Cr | Near | ||||||
mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
6819 | 95 | three.7402 | 120 | four.7244 | 13 | .5118 | thirteen | .5118 | 1 | .0390 | 18089 | 19616 | .2980 |
6820 | 100 | three.9370 | 125 | four.9213 | 13 | .5118 | 13 | .5118 | 1 | .0390 | 18340 | 20266 | .3110 |
6821 | a hundred and five | four.1339 | 130 | five.1181 | 13 | .5118 | thirteen | .5118 | 1 | .0390 | 18912 | 20924 | .3250 |
6822 | 110 | 4.3307 | one hundred forty | five.5118 | 16 | .6299 | sixteen | .6299 | one | .0390 | 28100 | 30700 | .5100 |
6824 | one hundred twenty | four.7244 | 150 | five.9055 | sixteen | .6299 | sixteen | .6299 | 1 | .0390 | 28900 | 32900 | .5490 |
6826 | 130 | 5.1181 | 165 | six.4961 | eighteen | .7087 | 18 | .7087 | 1.one | .0430 | 37900 | 42900 | .7900 |
6828 | one hundred forty | five.1181 | one hundred seventy five | six.8898 | eighteen | .7087 | eighteen | .7087 | one | . 0571 | 38200 | 44300 | .9900 |
6830 | a hundred and fifty | 5.9055 | 190 | seven.4803 | 20 | .7874 | 20 | .7874 | 1 | . 0571 | 49100 | 57100 | 1.5000 |
6832 | one hundred sixty | six.2992 | 200 | seven.8740 | 20 | .7874 | twenty | .7874 | 1 | . 0571 | 49600 | 59100 | one.7000 |
6834 | 170 | 6.6929 | 215 | eight.4646 | 22 | .8661 | 22 | .8661 | one | . 0571 | 61500 | 73300 | 1.9000 |
6836 | one hundred eighty | 7.0866 | 225 | 8.8582 | 22 | .8661 | 22 | .8661 | 1 | . 0571 | 62300 | 75900 | two.0000 |
6838 | a hundred ninety | 7.4803 | 240 | nine.4480 | 24 | .9449 | 24 | .9449 | 1.5 | .0590 | 75100 | 91600 | 2.1000 |
6840 | two hundred | seven.8740 | 250 | nine.8425 | 24 | .9449 | 24 | .9449 | one.5 | .0590 | 74200 | 91200 | two.3800 |
6844 | 220 | eight.6614 | 270 | 10.6299 | 24 | .9499 | – | – | 1.5 | .0590 | 76400 | 97800 | 2.7900 |
6848 | 240 | 9.4488 | three hundred | eleven.8110 | 28 | 1.1571 | – | – | two | .0787 | 83500 | 108000 | four.5000 |
6852 | 260 | ten.2362 | 320 | 12.5984 | 28 | 1.1571 | – | – | 2 | .0787 | 95000 | 128000 | 4.8500 |
6856 | 280 | 11.5716 | 350 | 13.7795 | 33 | 1.2992 | – | – | two | .0787 | 135000 | 178000 | seven.6000 |
6860 | three hundred | 11.8110 | 380 | 14.9606 | 38 | 1.4960 | – | – | 2 | .0787 | 162000 | 222000 | 11.0000 |
6864 | 320 | twelve.5984 | 400 | 15.7480 | 38 | one.4960 | – | – | two | .0787 | 168000 | 235000 | twelve.0000 |
6872 | 360 | 14.1732 | 440 | 17.3228 | 38 | one.4960 | – | – | two.five | .0984 | – | – | twelve.2000 |
6876 | 380 | fourteen.9606 | 480 | eighteen.8976 | 46 | 1.8110 | – | – | 2.5 | .0984 | 168000 | 235000 | twenty.5000 |
6880 | 400 | 15.7480 | 500 | 19.6850 | 46 | 1.8110 | – | – | 2.five | .0984 | – | – | 21.7000 |
6884 | 420 | 16.5354 | 520 | twenty.4724 | forty six | 1.8110 | – | – | two.5 | .1377 | 251000 | 425000 | 22.0000 |
6888 | 440 | seventeen.3228 | 540 | 21.2598 | forty six | 1.8110 | – | – | two.5 | .0984 | – | – | 24.0000 |
6892 | 460 | 18.1102 | 580 | 22.8346 | fifty six | two.2047 | – | – | three | .1181 | – | – | 33.5000 |
Certifications
Packaging & Shipping
Packaging Particulars
one.plastic tube + carton box + woven bag + pallet
2.Can be dependent on customer calls for
Firm Profile
Ltd. is situated in No.ninety three North Yangmei Avenue, Henghe Town, HangZhou Town, ZHangZhoug Province, which is known as the “Kingdom of Bearings”. Underneath the jurisdiction of Jiewei Bearing Manufacturing unit, Jiechuang Bearing Manufacturing facility and Jiewang Bearing Manufacturing facility.
The 3 factories collectively cover an location of 12,000 sq. meters, with a development spot of 16,000 square meters. With 48 automatic manufacturing traces, the annual output price is more than one hundred million yuan.
Right after several years of technology and market accumulation, the merchandise have received a certain popularity and impact in the industry. Jiewei bearing in the spirit of always responsible for the customer’s unique intention, to significantly do almost everything, and continually boost the quality of goods, enhance the quality of support, with sincerity, self-assurance, accountability for the function of provider to acquire have confidence in, acquire the foreseeable future!
Generation capability
Large-end merchandise production line, every line everyday output of about 6000 sets, the output worth of 6000 yuan, with twelve high-finish production strains.
JIEWANG Bearing Manufacturing facility creates motor bearings and energy tool bearings mostly in 60, 62 and 63 sequence, with 14 manufacturing strains, mainly for end-supporting, according to the measurement of the design, the typical quantity is 6000-8000 sets.
JIEWEI Bearing Manufacturing facility has 22 manufacturing lines for the mid-selection miniature and slender-walled collection, with twelve strains for bore diameter below 17MM, and the regular daily output is about 8000 sets, and ten traces for skinny-walled collection, with the typical production benefit of 2400 sets for bore diameter 10-50. For the aperture previously mentioned fifty, it is about 800-1300 sets.
FAQ
one. WHO ARE CZPT BEARING?
We are based mostly in ZHangZhoug, China, start from 2000,market to Mid East(thirty.00%), Japanese Europe(twenty.00%), Domestic Industry(15.00%), South Asia(10.00%), North The usa(10.00%), Southeast Asia(ten.00%), South America(5.00%)
There are total about 11-fifty men and women in our place of work.
2. HOW CAN WE Assure Top quality?
Often a pre-creation sample before mass manufacturing
Always ultimate Inspection prior to cargo
3. WHAT CAN YOU Get FROM US?
Deep Groove Ball Bearings, Spherical Roller Bearings, Cylindrical Roller Bearings, Tapered Roller Bearings and Ceramic Bearings.
Specilizing In Thin Wall Bearing, Micro-Bearing, Miniature Bearings, Inch bearings
4. WHY Must YOU Acquire FROM US NOT FROM OTHER SUPPLIERS?
HangZhou CZPT Bearing Co., Ltd was founded in 2000 , has been carrying out deep groove bearing domestic enterprise previously for 22 many years with very own logo “JVB”, so that has a good popularity in China and near coorparation factories to make certain steady high quality.
5. WHAT Services CAN WE Give?
Accepted Shipping Conditions: FOB,CFR,CIF
Acknowledged Payment Forex: USD,CNY
Recognized Payment Sort: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow
Language Spoken: English,Chinese
Software
Certain purposes of deep groove ball bearings.
Aircraft versions, remote management cars, device tools, motors, pumps, agricultural machinery, textile machinery, laser printers, instruments, measuring instruments, digital areas, and so forth.
US $0.3 / Piece | |
10 Pieces (Min. Order) |
###
Contact Angle: | 15-60° |
---|---|
Aligning: | Aligning Bearing |
Separated: | Separated |
Rows Number: | Single |
Load Direction: | Radial Bearing |
Material: | Bearing Steel |
###
Samples: |
US$ 0.3/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Deep Groove Ball Bearing |
Size | All models |
Material | Chrome Steel (Gcr15) + G16 |
Noise Level | Z1, Z2, Z3, Z4 |
Clearance | C0,CM,C3,C4,C2 |
###
No. | Size | Rated load | Weight | ||||||||||
Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
683 | 3 | 0.1181 | 7 | 0.2756 | 2 | 0.0787 | 3 | 0.1181 | 0.1 | 0.004 | 420 | 135 | 0.0010 |
684 | 4 | 0.1575 | 9 | 0.3543 | 2.5 | 0.0984 | 4 | 0.1575 | 0.1 | 0.004 | 480 | 170 | 0.0010 |
685 | 5 | 0.1969 | 11 | 0.4331 | 3 | 0.1181 | 5 | 0.1969 | 0.15 | 0.006 | 770 | 320 | 0.0019 |
686 | 6 | 0.2362 | 13 | 0.5118 | 3.5 | 0.1378 | 5 | 0.1969 | 0.15 | 0.006 | 1080 | 440 | 0.0027 |
687 | 7 | 0.2756 | 14 | 0.5512 | 3.5 | 0.1378 | 5 | 0.1969 | 0.15 | 0.006 | 1170 | 510 | 0.0030 |
688 | 8 | 0.3150 | 16 | 0.6299 | 4 | 0.1575 | 5 | 0.1969 | 0.2 | 0.008 | 1250 | 590 | 0.0038 |
689 | 9 | 0.3543 | 17 | 0.6693 | 4 | 0.1575 | 5 | 0.1969 | 0.2 | 0.008 | 1330 | 660 | 0.0440 |
6800 | 10 | 0.3937 | 19 | 0.7480 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1590 | 750 | 0.0050 |
6801 | 12 | 0.4724 | 21 | 0.8268 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1910 | 1040 | 0.0060 |
6802 | 15 | 0.5906 | 24 | 0.9449 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 2070 | 1250 | 0.0070 |
6803 | 17 | 0.6693 | 26 | 1.0236 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 2130 | 1360 | 0.0080 |
6804 | 20 | 0.7874 | 32 | 1.2598 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3480 | 2230 | 0.0190 |
6805 | 25 | 0.9843 | 37 | 1.4567 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3680 | 2630 | 0.0220 |
6806 | 30 | 1.1811 | 42 | 1.6535 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4000 | 3150 | 0.0260 |
6807 | 35 | 1.3780 | 47 | 1.8504 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4270 | 3600 | 0.0290 |
6808 | 40 | 1.5748 | 52 | 2.0472 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4410 | 3890 | 0.0330 |
6809 | 45 | 1.7717 | 58 | 2.2835 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4590 | 4330 | 0.0400 |
6810 | 50 | 1.9685 | 65 | 2.5591 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 6610 | 6080 | 0.0520 |
6811 | 55 | 2.1654 | 72 | 2.3846 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 8530 | 8080 | 0.0830 |
6812 | 60 | 2.3622 | 78 | 3.0709 | 10 | 0.3937 | 10 | 0.3937 | 0.3 | 0.012 | 9200 | 8760 | 0.1060 |
6813 | 65 | 2.5591 | 85 | 3.3465 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 10510 | 9420 | 0.1250 |
6814 | 70 | 2.7559 | 90 | 3.5433 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 10890 | 10090 | 0.1350 |
6815 | 75 | 2.9528 | 95 | 3.7402 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 11230 | 10760 | 0.1450 |
6816 | 80 | 3.1496 | 100 | 3.9370 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 11320 | 11080 | 0.1550 |
6817 | 85 | 3.3465 | 110 | 4.3307 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 17599 | 18300 | 0.2650 |
6818 | 90 | 3.5433 | 115 | 4.5276 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 17853 | 18961 | 0.2800 |
No. | Size | Rated load | Weight | ||||||||||
Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
6819 | 95 | 3.7402 | 120 | 4.7244 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18089 | 19616 | 0.2980 |
6820 | 100 | 3.9370 | 125 | 4.9213 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18340 | 20266 | 0.3110 |
6821 | 105 | 4.1339 | 130 | 5.1181 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18912 | 20924 | 0.3250 |
6822 | 110 | 4.3307 | 140 | 5.5118 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.0390 | 28100 | 30700 | 0.5100 |
6824 | 120 | 4.7244 | 150 | 5.9055 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.0390 | 28900 | 32900 | 0.5490 |
6826 | 130 | 5.1181 | 165 | 6.4961 | 18 | 0.7087 | 18 | 0.7087 | 1.1 | 0.0430 | 37900 | 42900 | 0.7900 |
6828 | 140 | 5.1181 | 175 | 6.8898 | 18 | 0.7087 | 18 | 0.7087 | 1 | 0.0393 | 38200 | 44300 | 0.9900 |
6830 | 150 | 5.9055 | 190 | 7.4803 | 20 | 0.7874 | 20 | 0.7874 | 1 | 0.0393 | 49100 | 57100 | 1.5000 |
6832 | 160 | 6.2992 | 200 | 7.8740 | 20 | 0.7874 | 20 | 0.7874 | 1 | 0.0393 | 49600 | 59100 | 1.7000 |
6834 | 170 | 6.6929 | 215 | 8.4646 | 22 | 0.8661 | 22 | 0.8661 | 1 | 0.0393 | 61500 | 73300 | 1.9000 |
6836 | 180 | 7.0866 | 225 | 8.8582 | 22 | 0.8661 | 22 | 0.8661 | 1 | 0.0393 | 62300 | 75900 | 2.0000 |
6838 | 190 | 7.4803 | 240 | 9.4480 | 24 | 0.9449 | 24 | 0.9449 | 1.5 | 0.0590 | 75100 | 91600 | 2.1000 |
6840 | 200 | 7.8740 | 250 | 9.8425 | 24 | 0.9449 | 24 | 0.9449 | 1.5 | 0.0590 | 74200 | 91200 | 2.3800 |
6844 | 220 | 8.6614 | 270 | 10.6299 | 24 | 0.9499 | – | – | 1.5 | 0.0590 | 76400 | 97800 | 2.7900 |
6848 | 240 | 9.4488 | 300 | 11.8110 | 28 | 1.1023 | – | – | 2 | 0.0787 | 83500 | 108000 | 4.5000 |
6852 | 260 | 10.2362 | 320 | 12.5984 | 28 | 1.1023 | – | – | 2 | 0.0787 | 95000 | 128000 | 4.8500 |
6856 | 280 | 11.0236 | 350 | 13.7795 | 33 | 1.2992 | – | – | 2 | 0.0787 | 135000 | 178000 | 7.6000 |
6860 | 300 | 11.8110 | 380 | 14.9606 | 38 | 1.4960 | – | – | 2 | 0.0787 | 162000 | 222000 | 11.0000 |
6864 | 320 | 12.5984 | 400 | 15.7480 | 38 | 1.4960 | – | – | 2 | 0.0787 | 168000 | 235000 | 12.0000 |
6872 | 360 | 14.1732 | 440 | 17.3228 | 38 | 1.4960 | – | – | 2.5 | 0.0984 | – | – | 12.2000 |
6876 | 380 | 14.9606 | 480 | 18.8976 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | 168000 | 235000 | 20.5000 |
6880 | 400 | 15.7480 | 500 | 19.6850 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | – | – | 21.7000 |
6884 | 420 | 16.5354 | 520 | 20.4724 | 46 | 1.8110 | – | – | 2.5 | 0.1377 | 251000 | 425000 | 22.0000 |
6888 | 440 | 17.3228 | 540 | 21.2598 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | – | – | 24.0000 |
6892 | 460 | 18.1102 | 580 | 22.8346 | 56 | 2.2047 | – | – | 3 | 0.1181 | – | – | 33.5000 |
US $0.3 / Piece | |
10 Pieces (Min. Order) |
###
Contact Angle: | 15-60° |
---|---|
Aligning: | Aligning Bearing |
Separated: | Separated |
Rows Number: | Single |
Load Direction: | Radial Bearing |
Material: | Bearing Steel |
###
Samples: |
US$ 0.3/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Deep Groove Ball Bearing |
Size | All models |
Material | Chrome Steel (Gcr15) + G16 |
Noise Level | Z1, Z2, Z3, Z4 |
Clearance | C0,CM,C3,C4,C2 |
###
No. | Size | Rated load | Weight | ||||||||||
Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
683 | 3 | 0.1181 | 7 | 0.2756 | 2 | 0.0787 | 3 | 0.1181 | 0.1 | 0.004 | 420 | 135 | 0.0010 |
684 | 4 | 0.1575 | 9 | 0.3543 | 2.5 | 0.0984 | 4 | 0.1575 | 0.1 | 0.004 | 480 | 170 | 0.0010 |
685 | 5 | 0.1969 | 11 | 0.4331 | 3 | 0.1181 | 5 | 0.1969 | 0.15 | 0.006 | 770 | 320 | 0.0019 |
686 | 6 | 0.2362 | 13 | 0.5118 | 3.5 | 0.1378 | 5 | 0.1969 | 0.15 | 0.006 | 1080 | 440 | 0.0027 |
687 | 7 | 0.2756 | 14 | 0.5512 | 3.5 | 0.1378 | 5 | 0.1969 | 0.15 | 0.006 | 1170 | 510 | 0.0030 |
688 | 8 | 0.3150 | 16 | 0.6299 | 4 | 0.1575 | 5 | 0.1969 | 0.2 | 0.008 | 1250 | 590 | 0.0038 |
689 | 9 | 0.3543 | 17 | 0.6693 | 4 | 0.1575 | 5 | 0.1969 | 0.2 | 0.008 | 1330 | 660 | 0.0440 |
6800 | 10 | 0.3937 | 19 | 0.7480 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1590 | 750 | 0.0050 |
6801 | 12 | 0.4724 | 21 | 0.8268 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1910 | 1040 | 0.0060 |
6802 | 15 | 0.5906 | 24 | 0.9449 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 2070 | 1250 | 0.0070 |
6803 | 17 | 0.6693 | 26 | 1.0236 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 2130 | 1360 | 0.0080 |
6804 | 20 | 0.7874 | 32 | 1.2598 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3480 | 2230 | 0.0190 |
6805 | 25 | 0.9843 | 37 | 1.4567 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3680 | 2630 | 0.0220 |
6806 | 30 | 1.1811 | 42 | 1.6535 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4000 | 3150 | 0.0260 |
6807 | 35 | 1.3780 | 47 | 1.8504 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4270 | 3600 | 0.0290 |
6808 | 40 | 1.5748 | 52 | 2.0472 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4410 | 3890 | 0.0330 |
6809 | 45 | 1.7717 | 58 | 2.2835 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4590 | 4330 | 0.0400 |
6810 | 50 | 1.9685 | 65 | 2.5591 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 6610 | 6080 | 0.0520 |
6811 | 55 | 2.1654 | 72 | 2.3846 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 8530 | 8080 | 0.0830 |
6812 | 60 | 2.3622 | 78 | 3.0709 | 10 | 0.3937 | 10 | 0.3937 | 0.3 | 0.012 | 9200 | 8760 | 0.1060 |
6813 | 65 | 2.5591 | 85 | 3.3465 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 10510 | 9420 | 0.1250 |
6814 | 70 | 2.7559 | 90 | 3.5433 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 10890 | 10090 | 0.1350 |
6815 | 75 | 2.9528 | 95 | 3.7402 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 11230 | 10760 | 0.1450 |
6816 | 80 | 3.1496 | 100 | 3.9370 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.024 | 11320 | 11080 | 0.1550 |
6817 | 85 | 3.3465 | 110 | 4.3307 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 17599 | 18300 | 0.2650 |
6818 | 90 | 3.5433 | 115 | 4.5276 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 17853 | 18961 | 0.2800 |
No. | Size | Rated load | Weight | ||||||||||
Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
6819 | 95 | 3.7402 | 120 | 4.7244 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18089 | 19616 | 0.2980 |
6820 | 100 | 3.9370 | 125 | 4.9213 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18340 | 20266 | 0.3110 |
6821 | 105 | 4.1339 | 130 | 5.1181 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18912 | 20924 | 0.3250 |
6822 | 110 | 4.3307 | 140 | 5.5118 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.0390 | 28100 | 30700 | 0.5100 |
6824 | 120 | 4.7244 | 150 | 5.9055 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.0390 | 28900 | 32900 | 0.5490 |
6826 | 130 | 5.1181 | 165 | 6.4961 | 18 | 0.7087 | 18 | 0.7087 | 1.1 | 0.0430 | 37900 | 42900 | 0.7900 |
6828 | 140 | 5.1181 | 175 | 6.8898 | 18 | 0.7087 | 18 | 0.7087 | 1 | 0.0393 | 38200 | 44300 | 0.9900 |
6830 | 150 | 5.9055 | 190 | 7.4803 | 20 | 0.7874 | 20 | 0.7874 | 1 | 0.0393 | 49100 | 57100 | 1.5000 |
6832 | 160 | 6.2992 | 200 | 7.8740 | 20 | 0.7874 | 20 | 0.7874 | 1 | 0.0393 | 49600 | 59100 | 1.7000 |
6834 | 170 | 6.6929 | 215 | 8.4646 | 22 | 0.8661 | 22 | 0.8661 | 1 | 0.0393 | 61500 | 73300 | 1.9000 |
6836 | 180 | 7.0866 | 225 | 8.8582 | 22 | 0.8661 | 22 | 0.8661 | 1 | 0.0393 | 62300 | 75900 | 2.0000 |
6838 | 190 | 7.4803 | 240 | 9.4480 | 24 | 0.9449 | 24 | 0.9449 | 1.5 | 0.0590 | 75100 | 91600 | 2.1000 |
6840 | 200 | 7.8740 | 250 | 9.8425 | 24 | 0.9449 | 24 | 0.9449 | 1.5 | 0.0590 | 74200 | 91200 | 2.3800 |
6844 | 220 | 8.6614 | 270 | 10.6299 | 24 | 0.9499 | – | – | 1.5 | 0.0590 | 76400 | 97800 | 2.7900 |
6848 | 240 | 9.4488 | 300 | 11.8110 | 28 | 1.1023 | – | – | 2 | 0.0787 | 83500 | 108000 | 4.5000 |
6852 | 260 | 10.2362 | 320 | 12.5984 | 28 | 1.1023 | – | – | 2 | 0.0787 | 95000 | 128000 | 4.8500 |
6856 | 280 | 11.0236 | 350 | 13.7795 | 33 | 1.2992 | – | – | 2 | 0.0787 | 135000 | 178000 | 7.6000 |
6860 | 300 | 11.8110 | 380 | 14.9606 | 38 | 1.4960 | – | – | 2 | 0.0787 | 162000 | 222000 | 11.0000 |
6864 | 320 | 12.5984 | 400 | 15.7480 | 38 | 1.4960 | – | – | 2 | 0.0787 | 168000 | 235000 | 12.0000 |
6872 | 360 | 14.1732 | 440 | 17.3228 | 38 | 1.4960 | – | – | 2.5 | 0.0984 | – | – | 12.2000 |
6876 | 380 | 14.9606 | 480 | 18.8976 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | 168000 | 235000 | 20.5000 |
6880 | 400 | 15.7480 | 500 | 19.6850 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | – | – | 21.7000 |
6884 | 420 | 16.5354 | 520 | 20.4724 | 46 | 1.8110 | – | – | 2.5 | 0.1377 | 251000 | 425000 | 22.0000 |
6888 | 440 | 17.3228 | 540 | 21.2598 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | – | – | 24.0000 |
6892 | 460 | 18.1102 | 580 | 22.8346 | 56 | 2.2047 | – | – | 3 | 0.1181 | – | – | 33.5000 |
Choosing the Right Ball Bearing for Your Application
When choosing a Ball Bearing, there are several things to consider. These factors include: the size, lubricant type, presence of corrosive agents, stray electrical currents, and more. It can be challenging to choose the right type, size, and type of ball bearing for your application. You should also carefully calculate the loads to determine the right size. Here are some tips for choosing the right Ball Bearing for your application.
Single-row
The single-row ball bearing is one of the most popular types of bearings. The inner and outer ring are designed with raceway grooves that are shaped slightly larger than the balls. This type of bearing has a low torque and can handle high-speed applications with minimal power loss. The radial dimensions of single-row ball bearings also vary, so it is possible to find one that fits your specific application. Besides the above-mentioned advantages, single-row ball bearings are also available with varying grease levels and are widely applicable to applications where the space is limited.
Single-row ball bearings are also called angular-contact ball bearings. Because of their single-row design, they are not separable and can accommodate a high-speed, heavy-duty application. Single-row angular-contact ball bearings can only handle axial load in one direction, and they must be installed in pairs for pure radial loads. Single-row ball bearings are a popular type of rolling bearings and can be used for a wide range of applications.
Self-aligning
The self-aligning ball bearing was invented by Sven Wingquist, a plant engineer for a textile company in Sweden. While he was responsible for making production as efficient as possible, he soon realized that the machinery he had in place wasn’t working as efficiently as it could. Although ball bearings are great for reducing friction, they were not flexible enough to compensate for misalignments in the machine.
Self-aligning ball bearings have two rows of balls and a common sphered raceway. The inner ring is curved and combines the two rows of balls into one cage. These bearings can tolerate shaft misalignment and compensate for static angular defects. They can be used in simple woodworking machinery, ventilators, and conveying equipment. They are often the preferred choice for applications where shaft alignment is an issue.
Ceramic
A Ceramic ball bearing is a type of high-performance bearing that is available in both full-ceramic and hybrid forms. The main differences between ceramic and steel ball bearings are their construction, lubrication, and mobility. High-quality ceramic ball bearings are durable, and they are ideal for corrosive and high-temperature applications. The material used to create these bearings helps prevent electrolytic corrosion. They are also ideal for reducing the friction and lubrication requirements.
Ceramic balls are harder and less brittle than steel balls, which gives them a higher degree of rigidity. Ceramics also have a higher hardness, with a hardness of Rc75-80 compared to Rc58-64 for steel balls. Their high compressive strength is approximately 5 to 7 times greater than steel. In addition, they have a very low coefficient of friction, which allows them to spin at higher speeds and with less friction. This increases their lifespan and durability, and decreases the energy needed to turn cranks.
Steel
Unlike traditional bearings, steel balls have a relatively uniform hardness. Carbon steel, for instance, is 2.1% carbon by weight. According to the American Iron and Steel Institute, copper content must be no more than 0.40% and manganese content should not be more than 1.65 g/cm3. After carbonizing, steel balls undergo a process called sizing, which improves their roundness geometry and hardness.
The main differences between steel ball bearings and ceramic ball bearings can be traced to their different materials. Ceramic balls are made from zirconium dioxide or silicon nitride. Silicon nitride is harder than steel and resists shocks. The result is increased speed and longer service life. Polyoxymethylene acetal (PMMA) bearing balls are known for their stiffness, strength, and tolerance, but are not as common as steel ball bearings.
Plastic
The most popular types of plastic ball bearings are made of polypropylene or PTFE. These bearings are used in applications requiring higher chemical resistance. Polypropylene is a structural polymer that offers excellent physical and chemical properties, including excellent resistance to organic solvents and degreasing agents. Its lightweight, low moisture absorption rate, and good heat resistance make it an excellent choice for high-temperature applications. However, plastic bearings are not without their drawbacks, especially when operating at very high temperatures or under heavy loads.
Compared to metal bearings, plastic ball-bearings do not require lubrication. They also are highly corrosion-resistant, making them an excellent choice for wash-down applications. They are also post-, autoclave-, and gamma sterilizable. Many conventional steel ball-bearings cannot handle the high temperatures of food processing or swimming pools. In addition to high temperature applications, plastic ball bearings are resistant to chemicals, including chlorine.
Glass
Plastic sliding bearings are molded bearings made of engineering plastic. With self-lubricating modification technology, these bearings can be produced by injection molding of plastic beads. They are widely used in various industries such as office equipment, fitness and automotive equipment. In addition to plastic bearings, glass balls are used in a variety of other applications, including medical equipment. Glass ball bearings have excellent corrosion resistance, excellent mechanical properties, and are electrically insulators.
Plastic ball bearings are made of all-plastic races and cages. These bearings are suitable for applications that are exposed to acids and alkalis. Because they are cheaper than glass balls, plastic ball bearings are popular in chemical-exposed environments. Stainless steel balls are also resistant to heat and corrosion. But the main disadvantage of plastic ball bearings is that they are not as strong as glass balls. So, if weight and noise is your main concern, consider using plastic balls instead.
Miniature
The global miniature ball bearing market is expected to reach US$ 2.39 Billion by 2027, at a CAGR of 7.2%. Growth in the region is attributed to technological advancement and government initiatives. Countries such as India and China are attracting FDIs and emphasizing the establishment of a global manufacturing hub. This is boosting the market for miniature ball bearings. The miniscule ball bearings are manufactured in small quantities and are very small.
Some manufacturers produce miniature ball bearings in different materials and designs. Chrome steel is the most popular material for miniature ball bearings because of its high load capacity, low noise properties, and lower cost. But the cost of stainless steel miniature bearings is low, since the amount of steel used is minimal. Stainless steel miniature bearings are the smallest in size. Therefore, you can choose stainless steel mini ball bearings for high-speed applications.
Angular-contact
Angular-contact ball bearings have three components: a cage, inner ring, and balls. Angular-contact ball bearings can support high axial and radial loads. Various design and manufacturing attributes make angular-contact ball bearings suitable for a variety of applications. Some features of this bearing type include a special lubricant, different cage materials, and different coatings.
The size of an angular-contact ball bearing is determined by the design units: outer ring width, axial load, and radial load. Depending on the type of application, an angular-contact ball bearing may be manufactured in double-row, triple-row, or quadruple-row configurations. Angular contact ball bearings can be classified according to their design units, which range from metric to imperial. A higher ABEC number means tighter tolerances. To determine the tolerance equivalent of a particular bearing, consult a standard Angular-contact ball bearing table.
Angular-contact ball bearings feature high and low-shoulder configurations. They have two-dimensional races that accommodate axial and radial loads. They are available in self-retaining units with solid inner and outer rings, and ball and cage assemblies. Cages made of cast and wrought brass are the most popular, but lightweight phenolic cages are also available. The latter is a better choice because it doesn’t absorb oil and has lower rolling friction.
Materials
When it comes to the construction of a ball bearing, high-quality raw materials are a crucial component. These materials not only affect the overall quality of a ball bearing, but also influence the cost. That’s why you should pay close attention to raw material quality. In addition to that, raw materials should be tested several times before the manufacturing process to ensure quality. Read on for some information about the different types of materials used to make ball bearings.
Steel is the most common material for ball bearings. Most ball bearings contain stainless steel balls, which are remarkably corrosion-resistant. They are also resistant to saltwater and alkalis. However, stainless steel balls are heavier than plastic ones, and they are also magnetic, which may be a drawback in some applications. If you’re looking for a metal-free option, glass balls are the way to go. They’re sturdy, lightweight, and resistant to a wide range of chemicals.
editor by czh 2023-01-16